Envase de hardware - pequeño

Puntuación media de reseñas (6):

  • Envase de hardware - pequeño
    Galería de imágenes

Almacenar y organizar tornillos Kreg y otro hardware en el taller y sobre la marcha. 

  • 3" x 4 amplia1/4"alto x 17/8"profunda
  • Tapa de cierre con una escribir-en etiqueta
  • Borrado en seco superficie de actualización fácil de etiquetas
  • Cuerpo transparente apilable
  • Encaja el Kreg Screw Organizer, System Organizer, y Envase grande de Hardware
  • Vendido en packs de cuatro

$7.99 USD


Encuentre un distribuidor


Kreg Hardware Containers son la solución perfecta para almacenar y organizar todo tipo de herramientas flojas. Estos envases prácticos son los mismo contenedores resellables, reutilizables, durables que se utilizan para paquete tornillos Kreg.

Hardware Containers, sin embargo, tienen las tapas con una superficie que se puede escribir en identificar fácilmente lo que se almacena dentro de. Disponible en Pequeño Y grandes formatos, Hardware Containers cabe dentro de la nueva Screw OrganizerY en el Las guías de taladro Kreg System Organizer, también. Hardware Containers se venden en packs de cuatro.

Disponible en dos tamaños:

  • Pequeño: 3" x 4 amplia1/4"alto x 17/8"profunda
  • Grande: 1/4"gran x 61/4"alto x 17/8"profunda



3" x 4 amplia1/4"alto x 17/8"profunda (76 mm x 108 mm x 47 mm)


Transparente, apilable, reutilizable


Escribir-en etiqueta resellable

Se adapta a

Screw Organizer | System Organizer | Envase grande de Hardwares


En paquetes de cuatro

Comentarios para "Contenedores de Hardware - pequeño"

Puntuación media de reseñas:


I just bought screws in the new box. After struggling with the lid, I found a way to open the lid. I have a larger box but I think it will work on the small. I place my fingertips on the lid and my thumb on one of the clear corner tabs. With my thumb, I apply pressure to the tab deflecting it toward the box. While it is deflected, I pull the tab up a little and it presses that corner of the lid up. I can hear and feel the lid snap open.


By Bob Templeton

October 12, 2017


Love the containers, great for wood screw storage and organization.One problem though, I wish you sold replacement labels. I wrote on mine with a Sharpie and now I can't change names. Love all my Kreg products, keep up the good work.


By David Dillon

August 28, 2017

New Kreg boxes

Nice box but I cannot open them. If you are supposed to remove one of the corner tabs then I can get them open, But as an old retired guy these are very hard to open and I need a flat tool to pry them open.


By Ken Vargo

August 23, 2017

some containers are hard to open

I am changing my original review and adding a star. I think there could be a manufacturing flaw with some of the containers. The first container I tried to open was a 1-1-2". After working on it for several minutes I did finally get it open with a bottle opener. The second container was for 2-1/2". All I had to do to open it was bend one corner tab back and the lid opened easily with my thumb.


By Lou Warren

July 7, 2017

Works fine.

This is in reply to Mike's review. I think that's the point. As these are the same containers that they are now selling their screws in, those four tabs on the corners are the "tamper proofing" so people don't open them up in the store and steal things out.


By Ned Hummel

April 21, 2017

Lea más reseñas

This website uses first party and third party cookies to improve your experience and anonymously track site visits. By visiting this website, you opt-in to the use of cookies. OK