Rip-Cut™

Puntuación media de reseñas (12):
     

Cortes a medida paralelos y perpendiculares rectos, precisos y repetibles, hechos fácilmente

$39.99 USD

N.º DE ARTÍCULO: KMA2685

Encuentre un distribuidor

Descripción

Convierta una sierra circular normal en una herramienta de corte de precisión guiada por el borde

Los grandes proyectos empiezan por cortes de alta calidad y usted puede hacerlos, más fácilmente de lo que nunca ha imaginado, con su sierra circular y la guía de borde para sierra circular Rip-Cut™.

Kreg Rip-Cut™ convierte su sierra circular en una herramienta de corte de precisión guiada por el borde que traza cortes rectos, precisos y repetibles en contrachapado, MDF y otras grandes láminas. Con Rip-Cut™, puede cortar con la confianza que desea y la precisión que necesita.

Rip-Cut™ realiza cortes rectos, precisos y repetibles fácilmente sin necesidad de medir, marcar o tener que mantener la sierra en la línea de corte. Rip-Cut™ lo hace con una guía de borde larga que sigue el borde recto de la hoja que se está cortando. Así, todo lo que debe hacer es bloquear la sierra en la medida que desee (hasta 24") utilizando la escala integrada y, a continuación, realizar el corte.

Con la escala de medida integrada, tampoco es necesario medir y marcar cada corte. Basta con bloquear el soporte deslizante de la sierra en el ancho de corte deseado y ya está listo, tanto si desea cortar una sola pieza como varias piezas exactamente del mismo tamaño. Además, Rip-Cut™ le facilita el corte de grandes láminas por sí solo.

Rip-Cut™ es muy fácil de usar. Basta con montar la sierra sobre el soporte deslizante universal, que acepta la mayoría de sierras con hoja a la derecha o a la izquierda, y deslizar el soporte por encima del raíl de aluminio. Después de una sencilla calibración por una sola vez, puede bloquear el ancho de corte (hasta 24") utilizando la escala de medición y el cursor de precisión. A continuación, solo tiene que sostener la guía del borde contra el borde de la lámina mientras guía la sierra. Conseguirá siempre cortes rectos, precisos y repetibles fácilmente.

Accu-Cut y Rip-Cut: trazando la diferencia

Cómo cortar grandes paneles con Accu-Cut™ y Rip-Cut™

Uso del soporte deslizante Accu-Cut sobre el Rip-Cut

Cómo utilizar el soporte deslizante Rip-Cut™ con Accu-Cut™

Especificaciones

Raíl de aluminio

3" (76,2 mm) de ancho x 30" (762 mm) de largo

Materiales

Aluminio de alta calidad y polímero plástico resistente a los impactos

Base deslizante para sierra

Acepta sierras con la hoja a la derecha o la izquierda, dispone de un tope indexador integrado y un cursor de precisión

Ancho de corte

Máximo de 24" (610 mm)

Incluido:

(1) Soporte deslizante para sierra universal, (1) Raíl de guía de aluminio, (1) Guía de borde de precisión, instrucciones detalladas de preparación y uso

Aviso

Proposición 65

Manual Manual de América del norte
Manual de global

Reseñas de la "Rip-Cut™"

Puntuación media de reseñas:
     

Rip Cuts made easier

Like all of us, making good rip cuts on 8 ft. stock plywood is hard to do without a table saw base and good extensions - all of which take up a lot of room. Who but a cabinet-maker is going to have a panel saw? Anybody interested in this rig is probably cutting stock sitting on a pair of saw-horses. Once you have your saw mounted and aligned on the base (mine is a Porter-Cable with the saw on the LEFT side), it is easy enough take it on-off without worrying too much that you'll be misaligned. In application, it's somewhat tricky and requires a learning curve to glide the guide along the edge while pushing the saw. It's pretty easy to rock the guide and end up with an uneven cut. Others have complained on workmanship and 'plastic' components - but I find them sturdy and you don't have to have everything gorilla tight to ensure the fit. I still prefer my long straight edge spring clamped down (which I got so many years ago I don't know where you'd find one like it now) with a 1/2" offset to the blade. I'm assured of a steady bearing surface while pushing the saw and no rocking. The Kreg guide is a good jig for the price, just don't know how much I'll really use it.

     

By Mike Badley

March 20, 2019

Learning curve

I am a contractor and I build a lot of cabinets for clients. Cutting up the plywood without a panel saw is always a challenge. I was intrigued by this product and decided to give it a try. I used my Milwaukee 18V 6 1/2” saw, fit perfectly and having no cord is always nice. I was cutting my plywood in half at 24”. There is a bit of a learning curve on moving the saw and the guide when it is wide. I had trouble on the last 6” when the aluminum guide came off the material the saw wants to wander causing a roll on your material. I wish that was wider. After several cuts I started to figure out how to hold the guide to the end. It works great for small cuts less then 12”. Definitely, worth the money, helpful in the shop just practice on some old material before taking on the good stuff.

     

By Ken Bensen

January 13, 2019

I wish I'd have read the reviews first...

I have a Skil Legend saw, and this doesn't fit it well. I used it on a couple of my cuts, but found that I could make a better cut by hand. The way it clamps to the saw is "iffy" at best. I love all my other Kreg tools, but this one is relegated to the "ugh" bin. Unfortunately, the Skil is my go-to saw for most of my work, as it has the power and feel that I like for plywood projects. On the flip side, it fits my DeWalt saw nicely, but I use that saw for only the most basic cuts as it's not powerful enough for the big jobs.

     

By Ed Dulaney

December 4, 2018

Skill Saw fitment

I am basically happy with this attachment as it's not my go-to attachment for ripping the sheet goods. I, however, was disappointed that my Skill Saw would not attach to it. You would think with the Skill Saw being a major workhorse in the construction industry this would be a no-brainer. fortunately, I'm not a one saw person.

     

By Lyle Stanley

October 19, 2018

makes cutting plywood easy

I don't have a big table saw that can handle plywood sheets so I've been using other clamp/guides and it was always very hard to get right. This product is so much better! The edge guide stays useful as the front part leaves the wood. The only trouble I have is that the red line on the saw base attachment doesn't line with my blade so I have to measure carefully before I lock the slide on place. The slide can be hard to move. All on all, I love the tool.

     

By Tyler Smith

May 12, 2018

Lea más reseñas