Accu-Cut™

Puntuación media de reseñas (25):
     

Cortes rectos, precisos y sin astillas fácilmente

  • Rip, cross cut, and make angled cuts up to 50" long in plywood, MDF, and panels
  • Basta con alinear la pista de la guía con sus marcas para obtener cortes precisos
  • Mantenga la pista en su lugar sin abrazaderas gracias a las tiras de guía antideslizantes
  • Evite la aparición de astillas con las tiras antidesconchamiento que sostienen el material durante el corte
  • Empezar se corta fácilmente con un bloque de salida que soporta la sierra y permite la operación de protector de hoja normal
  • Monte prácticamente cualquier sierra circular, ya sea con la hoja a la derecha o a la izquierda, al soporte deslizante universal
  • El soporte deslizante universal es compatible con Kreg Rip-Cut™
  • Lleve la sierra hasta el material en lugar de llevar el material hasta la sierra
  • Vea un vídeo sobre cómo cortar grandes paneles con Accu-Cut y Rip-Cut

$79.99 USD

N.º DE ARTÍCULO: KMA2700

Encuentre un distribuidor

Descripción

Transform your circular saw into a high-performance, track-guided cutting tool

Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 50" long in plywood, MDF, and other large panels with super simple setup, precise accuracy, and amazing control.

Accu-Cut guía su sierra circular a lo largo de una pista de aluminio que mantiene la sierra en movimiento en línea recta fácilmente. El diseño de Accu-Cut™ facilita el montaje, ya que solo es necesario alinear la pista con la línea de corte. No se necesitan abrazaderas para sujetar la pista en su lugar, gracias a las tiras de guía dobles. Disponen de un recubrimiento antideslizante para evitar que resbalen y una función antidesconchamiento para evitar las astillas en los cortes. Además, la pista facilita la realización de cortes rectos en láminas sin un borde recto y plano.

Las sierras circulares no disponen de guías eficaces que las mantengan en movimiento recto a lo largo de una línea de corte. Además, puede ser difícil ver la trayectoria de corte de la hoja. Juntos, estos aspectos hacen que sea difícil mantener una sierra sobre el corte deseado. A menudo, las sierras circulares provocan el astillado en los recubrimientos de las caras. Accu-Cut™ soluciona estos problemas. Además, Accu-Cut™ es portátil, así que puede llevar la sierra hasta la pieza de trabajo y cortarla con precisión, en lugar de tener que manipular láminas pesadas en una sierra de banco. 

Accu-Cut™ es fácil e intuitiva de usar para usuarios noveles, pero lo suficientemente robusta para los profesionales. Puesto que elimina la necesidad de mantener la sierra recta y guiarla manualmente a lo largo de una línea de corte, Accu-Cut™ es ideal para usuarios menos experimentados. Accu-Cut™ también permite a los profesionales trabajar más rápido y ser más productivos, ya que permite realizar distintos cortes rápida y fácilmente en el taller y en el lugar del trabajo.

Accu-Cut y Rip-Cut: trazando la diferencia

Cómo cortar grandes paneles con Accu-Cut™ y Rip-Cut™

Uso del soporte deslizante Accu-Cut sobre el Rip-Cut

Cómo utilizar el soporte deslizante Accu-Cut™ con Rip-Cut™

Especificaciones

Pista de guía

Aluminio de calidad aeronáutica con tiras de guía duales, antidesconchamiento y antideslizantes 

Base deslizante para sierra

Acepta sierras con la hoja a la derecha y a la izquierda
Tope indexador y cursor de precisión integrados

Longitud de corte

Maximum 50" (1270mm)

Incluye

(1) Soporte deslizante para sierra universal, (2) Pistas de guía de aluminio de 26,5", (2) Conectores de pistas, (1) Bloque de inicio, (1) Clip indicador de pista, instrucciones detalladas de preparación y uso

Aviso

Proposición 65

Manual Manual de América del norte

Opiniones de "Accu-Cut™"

Puntuación media de reseñas:
     

Great product, but some parts need to be replaced

I purchased this device to rip large sheets of plywood. I own several Kreg tools and they are superb. My only fault with this device is the connecting stop screws used to join the two rail sets together. The "Phillips" set screws are substandard. The impression for the screw head are so shallow that even a prince tip will not fit enough to fasten down the two halves. It would have been better if they'd used either an Allen or Torx tip type set screw. With this combination I have now, the two halves will not stay together.

     

By Quentin Sligh

September 1, 2019

Good, but not great

Mostly I'll echo what others have talked about. I love Kreg tools. I have four pocket-hole jigs (mini, R3, K4, and K5), mulit-mark, all of the cabinet/drawer jigs, Rip-Cut, several styles of their clamps, have used a ton of Kreg hardware when making sleds and jigs in my shop, and the list goes on. My buddy even refers to me as the "Kreg poster boy" because I've talked about a dozen friends into the pocket-hole jigs over the years. So I'm familiar with their product and was expecting another home run when I bought the Accu-Cut. For the most part it works "okay", but has two main issues that keep it from being good or great. First, is the relatively cheep phillips drive set screws for joining the tracks. The loosen often and are made of soft material and strip easily. I had to replace mine with some decent allen drive screws from the hardware store. Second, like most others have noticed is the slop between the sled and the track. You can push the sled tight to the track (pick one side or the other) and then it works fairly well, but you need to be very conscious and consistent during every cut or you can have some less than great cuts. To me if that type of cutting is what I intended I could just as easily clamp a straight edge to my material and push against it.

     

By Michael McEwan

August 13, 2019

Does the job

I used to use a piece of 1x3 (various lengths) clamped to plywood for the rip and crosscuts, but the Accu-Cut does it better than the way I used to do it. It is sturdy (stays in place), accurate, and easy to configure for my Milwaukee circular saw.

     

By Alan Borack

June 28, 2019

Too much slop between track and saw.

I’ve tried to use the accu-cut several times. I have been disappointed with the results. While setting up the saw I noticed the track and plate were not a snug fit. This slop allows the saw to cut a quite crooked line. To combat this I would have to hold the saw tight against one side or the other of the track by pushing sideways to follow only one side of the track. However, this would cause the blade to contact the rubber edge or blade to not line up with the edge. This also caused the track to bind and to slip on the material. I’m sure this tool is better than freehanding a long cut. However, it cost way more than it should for the lack of precision.i purchased the track for a project but had to abandon my plans to use it due to poor performance. I therefore had to make all my cuts the old fashioned way. A trim board and two clamps. This worked way better and was pretty much free.

     

By Jason Hall

May 6, 2019

Very accurate

I found this product to be very accurate and it works perfectly with my Makita cordless circular saw. Would love to see more track sold separately.

     

By Alan Reddick

January 29, 2019

Lea más reseñas

Inspírese